Armpit stains are honestly the worst. They sneak up on your favorite white shirts, hang around like a bad memory, and somehow never seem to budge no matter how many times you wash them.

That ugly yellow tint is a mix of sweat, deodorant, and body oils just bonding together over time.

Luckily, OxiClean can actually help break that up and give your shirts a fresh start. It’s one of those laundry staples that works way better than most people expect.

In this post, I’ll show you how to use OxiClean for armpit stains.

Can I Use OxiClean For Armpit Stains?

Yes, OxiClean works wonders on all kinds of tough stains, including those pesky yellow armpit marks.

It’s an oxygen-based cleaner, and it works by releasing oxygen bubbles that lift and break down the gunk causing the armpit stain.

It’s especially good for white shirts that have those faint yellow halos under the arms. But it also works well on colored clothes that have darker sweat marks.

You just need to give it enough time to soak in and do its thing. A quick wash alone won’t cut it for older stains, but a good soak with OxiClean usually makes a big difference.

How To Use OxiClean For Armpit Stain

Now that we know OxiClean is great for armpit stains, let’s talk about how to actually use it. Don’t worry, it’s pretty simple. Here’s a step-by-step guide:

#1 Soak It First

The first thing you want to do is soak the stained area.

Fill a small tub or basin with warm water, and then add a scoop of OxiClean. Stir it up to make sure the OxiClean dissolves completely.

Then, toss the stained shirt or garment in and let it soak for at least an hour.

Soaking helps loosen up the stain and gives the OxiClean time to work. If you’ve got a really stubborn stain, you might even let it soak overnight for maximum results.

The longer it soaks, the more time OxiClean has to break down that nasty residue.

When you pull it out, you’ll usually see the water looking kind of cloudy or yellowish. That’s a good sign - it means the product is pulling the stain out of the fabric.

Also Read: Soaking Clothes In OxiClean Overnight

#2 Scrub (Optional)

If the stain is being extra stubborn, you might want to give it a little scrub. This step is optional, but it can help if the stain has been around for a while.

Take a soft brush (like an old toothbrush) and gently scrub the stained area after it’s been soaking. Be careful not to rub too hard or you could damage the fabric. You just want to help break down the stain a bit more.

The scrubbing process helps loosen the stain even further, so don’t skip it if the stain is really tough to get rid of.

You’ll notice the stain lifting away as you scrub, which is always a good sign.

#3 Wash As Usual

Once you’ve soaked and scrubbed (if needed), it’s time to toss the shirt into the washing machine.

Wash it as you normally would, but make sure to use the hottest water that’s safe for the fabric. OxiClean works best with warm or hot water, but always check the care label on your clothes first.

If you’re washing more than one item, make sure to add the right amount of detergent and OxiClean to your load.

You can use OxiClean as a laundry booster by adding it directly to the drum, or you can use it in the detergent compartment if your washer has one.

#4 Check Before Drying

Always check the stained area before you dry the shirt. The heat from the dryer can actually set the stain, making it much harder to remove later.

So, after the wash cycle is done, take a quick look at the armpit area.

If the stain is still there, don’t throw the shirt in the dryer just yet. Instead, repeat the soaking and scrubbing process and wash it again.

If the stain is gone, feel free to dry your shirt as usual. You can air dry it or toss it in the dryer if it’s safe for the fabric.

But remember, never dry a stained item until you’re 100% sure the stain is gone!

Tips For Tough Or Set-In Armpit Stains

Sometimes those older yellow marks just don’t want to leave. That’s when you need to go a little heavier with the treatment.

Here are a few quick tricks that help:

Use a paste made from OxiClean and a bit of warm water, and apply it directly to the stain. Let it sit for 30 minutes before soaking.
For really bad stains, soak overnight instead of just an hour or two.
Add OxiClean directly to the washer drum with your detergent for a little extra cleaning power.
Avoid hot water for delicate fabrics - warm is usually plenty.

Older stains often need a couple of rounds to fully disappear, especially if they’ve been sitting for months. But OxiClean usually gets you pretty close to new if you give it time to work.

Does OxiClean Work On All Fabrics?

Yes, OxiClean works great on most everyday materials like cotton, polyester, and blends.

That’s why it’s perfect for t-shirts, undershirts, workout clothes, and casual tops. It’s also safe for colored fabrics since it brightens but doesn’t bleach out color.

That said, skip it on delicate fabrics like silk, wool, or anything labeled “dry clean only.”

Those materials don’t react well to soaking or oxygen-based cleaners.

If you’re unsure, do a small patch test on a hidden area before soaking the whole thing. It’s always better to play it safe.

Also, avoid using it alongside bleach. OxiClean already has powerful cleaning agents that don’t mix well with chlorine bleach. It can cause discoloration or damage the fabric.

Bottom Line

OxiClean is hands-down one of the best ways to tackle armpit stains without ruining your clothes. It’s gentle on fabric but tough on that yellow build-up caused by sweat and deodorant.

A good soak, a little scrubbing, and a regular wash usually do the trick.

If you’ve been ready to give up on those stained shirts hiding in your closet, don’t. Give OxiClean a shot first - you might be surprised how fresh and bright they look afterward. It’s affordable, easy to use, and honestly, one of those products that just works.

No need for expensive stain removers or fancy tricks. Just let OxiClean do its thing.

Your favorite shirts will thank you for it!

Using OxiClean For Armpit Stains (Guide)